Cleaned all of the #44 bulbs under the playfield. That was a pain since each socket had to be unscrewed to access the bulb.
Started getting the operator switches ready to go back in the machine. Clipped all coin-mech switches and illumination wiring on the coin-door, then removed the corresponding pins from the connector that attaches to J5 on the ‘Coin Door Interface Board’ (WMS #A-20580). Did the same with the slam-tilt switch since I don’t think I’m gonna be needing that.
That left me with a nice cable with just the operator swtiches:
The ground cable looped around to everything I removed, so that’s the only thing that needs to be soldered.